If you're familar with the ×Magick command-line tools
convert
, mogrify
,
composite
, and montage
you can use
the tables on this page to determine which RMagick methods
correspond to the options used by these tools.
The options listed below are for ImageMagick 6.3.1. Earlier
releases of ImageMagick and the GraphicsMagick gm
command may not support all these options. Later releases of
ImageMagick may have options that are not listed.
×Magick's convert
and
mogrify
share many options with each other, as
well as with the other utilities. This table includes all the
options for both convert
and mogrify
.
When another utility has an option with the same name and
purpose, and same RMagick equivalent, the option is omitted
from the table for that utility.
Magick Option | RMagick Method |
---|---|
-adaptive-blur radiusxsigma | Image#adaptive_blur(radius=0.0, sigma=1.0) |
-adaptive-resize widthxheight | Image#adaptive_resize(width, height) |
-adaptive-sharpen radiusxsigma | Image#adaptive_sharpen(radius=0.0, sigma=1.0) |
-adjoin | No equivalent. All images in an imagelist are written to the same file if the file format supports multi-image files. |
-affine sx, rx, ry, sy, tx, ty | Draw#affine(sx,
rx, ry, sy, tx,
ty) (for drawing) Draw#affine=matrix (for annotation) |
-annotate x-rotatexy-rotate+x+y text | Draw#annotate(image, width, height, x, y, text) |
-antialias | Draw#stroke_antialias(true )Draw#text_antialias( true )
(for drawing)Draw#text_antialias= true
(for annotation) |
-append +append |
ImageList#append(true )ImageList#append( false ) |
-authenticate string | Image::Info#authenticate=string |
-auto-orient | Image#auto-orient |
-average | ImageList#average |
-backdrop color | No equivalent |
-background color | Image::Info#background_color=color |
-bias value[%] | Image#bias(value) Image#bias('value%') |
-black-point-compensation | Image#black_point_compensation=
true |
-black-threshold threshold | Image#black_threshold(red_channel [, green_channel [, blue_channel [, opacity_channel]]]) |
-blue-primary x,y | Image#chromaticity= chromaticity |
-blur radiusxsigma | Image#blur_image(radius=0.0, sigma=1.0) |
-border widthxheight | Image#border(width, height, color) |
-bordercolor color | Image#border_color=color |
-borderwidth geometry | No equivalent |
-cache threshold | See -limit, below |
-channel type | Image::Info#channel(type [,
type...]) Channel value arguments are accepted by many methods. |
-charcoal factor | Image#charcoal(radius=0.0, sigma=1.0) |
-chop widthxheight+x+y | Image#chop(x, y, width, height) |
-clip | No equivalent |
-clip-mask | No equivalent |
-clip-path | No equivalent |
-clone | Image#clone Image#copy Image#dup |
-coalesce | ImageList#coalesce |
-colorize value | Image#colorize(red, green, blue, [matte, ] fill) |
-colormap type | No equivalent |
-colors | This option corresponds to the first argument to Image#quantize and ImageList#quantize. |
-colorspace colorspace | Image#colorspace=colorspace Also corresponds to the colorspace argument to Image#quantize and ImageList#quantize |
-combine | No equivalent |
-comment string | Image#['Comment']=string |
-compose operator | This option corresponds to the composite_op argument to Image#composite. |
-composite | Image#composite(source_image, x, y, composite_op) |
-compress type | Image#compression=type |
-contrast +contrast |
Image#contrast(true )Image#contrast( false ) |
-contrast-stretch black-pointxwhite-point | Image#contrast_stretch_channel( black_point, white_point [, channel...]) |
-convolve kernel | Image#convolve(order, kernel) |
-crop widthxheight+x+y | Image#crop(x, y, width, height) |
-cycle amount | Image#cycle_colormap(amount) |
-debug | Magick.set_log_event_mask |
-deconstruct | ImageList#deconstruct |
-define key=value +define key |
Image::Info#define(format,
key, value) Image::Info#undefine(format, key) |
-delay ticksxticks-per-second | Image#ticks=ticks Image#ticks_per_second= ticks-per-second |
-delete index | ImageList#delete_at(index) |
-density widthxheight | Image#density="widthxheight" Image::Info#density="widthxheight" Image#x_resolution=width Image#y_resolution=height |
-depth depth | Image::Info#depth=depth |
-descend | No equivalent |
-despeckle | Image#despeckle |
-display | No equivalent |
-dispose method | Image#dispose=method |
-dissolve | See -dissolve, below |
-dither +dither |
This option corresponds to the dither option to Image#quantize and ImageList#quantize. |
-draw string | Draw#draw |
-edge radius | Image#edge(radius=0.0) |
-emboss radius | Image#emboss(radius=0.0, sigma=1.0) |
-encoding type | Draw#encoding(type) (for
drawing) Draw#encoding=type (for annotation) |
-endian type | Image#endian=type |
-enhance | Image#enhance |
-equalize | Image#equalize |
-evaluate operator value | Image#quantum_operator(operator, value [, channel]) |
-extent | No equivalent |
-extract widthxheight+x+y | Image::Info.extract="widthxheight+ x+y" |
-family name | Draw#family(name) (for
drawing) Draw#family=name (for annotation) |
-fill color | Draw#fill(color)
(for drawing) Draw#fill=color (for annotation) |
-filter type | This option corresponds to the filter option to Image#resize. |
-flatten | ImageList#flatten |
-flip | Image#flip |
-floodfill geometry color | Image#color_floodfill(x, y, color) |
-flop | Image#flop |
-font name | Draw#font(name)
(for drawing) Draw#font=name (for annotation) |
-foreground color | No equivalent |
-format type | Image#format=type |
-frame widthxheight+outer-bevel-width+ inner-bevel-width | Image#frame(width, height, x, y, inner_bevel_width, outer_bevel_width, color) |
-fuzz distance -fuzz distance% |
Image#fuzz=distance Image#fuzz="distance%" |
-fx expression | ImageList#fx(expression) |
-gamma red_gamma,green_gamma,blue_gamma | Image#gamma_correct(red_gamma[, green_gamma[, blue_gamma]]) |
-gaussian-blur radiusxsigma | Image#gaussian_blur(radius=0.0,
sigma=1.0) Image#gaussian_blur_channel( radius=0.0, sigma=1.0 [, channel...]) |
-geometry widthxheight+x+y | Image#geometry="widthx height+x+y" |
-gravity type | Draw#gravity(type) (for
drawing) Draw#gravity= type (for annotation) |
-green-primary x,y | Image#chromaticity= chromaticity |
-help | No equivalent |
-iconGeometry | No equivalent |
-iconic | No equivalent |
-identify | Image#inspect |
-immutable | Image#freeze |
-implode factor | Image#implode(factor) |
-insert index | ImageList#insert(index) ImageList#[index] |
-intent type | Image#rendering_intent= type |
-interlace type | Image#interlace=type |
-interpolate type | Image#pixel_interpolation_method= type |
-label name | Image#['Label']=name |
-lat widthxheight+offset | Image#adaptive_threshold( width, height, offset) |
-layers method | ImageList#optimize_layers(method) |
-level black-point,white-point,gamma | Image#level(black_point=0.0, white_point=MaxRGB, gamma=1.0) |
-limit type value | Magick.limit_resource(type, value) |
-linear-stretch black-pointxwhite-point | Image#linear_stretch(black_point [, white_point]) |
-linewidth width | Draw#stroke_width(width)
(for drawing) Draw#stroke_width=width (for annotation) |
-list color -list format -list type |
Magick.colors Magick.formats Magick.fonts |
-log string | Magick.set_log_format |
-loop iterations | ImageList#iterations=iterations |
-magnify | Image#magnify |
-map filename | Image#map(reference,
dither=false )ImageList#map(reference, dither= false ) |
-mask filename | Image#mask=mask |
-matte +matte |
Image#matte=true Image#matte= false |
-mattecolor color | This option corresponds to the color option to Image#frame. |
-median radius | Image#median_filter(radius=1.0) |
-metric type | This option corresponds to the metric option to Image#distortion_channel. |
-mode | No equivalent |
-modulate value | Image#modulate(brightness=1.0, saturation=1.0, hue=1.0) |
-monitor | Image#monitor= |
-monochrome | Image#image_type= Magick::BilevelType |
-morph frames | ImageList#morph(frames) |
-mosaic | ImageList#mosaic |
-motion-blur radiusxsigma+angle | Image#motion_blur(radius=0.0, sigma=1.0, angle=0.0) |
-name | No equivalent |
-negate +negate |
Image#negate Image#negate( true ) |
-noise radius +noise type |
Image#reduce_noise(radius) Image#add_noise( type) |
-normalize | Image#normalize |
-opaque color | Image#opaque(color, fill) |
-ordered-dither NxN | Image#ordered_dither(N) |
-orient orientation | Image#orientation=orientation |
-page
widthxheight+x+y -page media |
Image::Info.page="widthxheight+
x+y" Image::Info.page="media" |
-paint radius | Image#oil_paint(radius=3.0) |
-ping | Image.ping(filename) |
-pointsize value | Draw.pointsize(value) (for
drawing) Draw.pointsize=value (for annotation) |
+polaroid angle | Image.polaroid(angle=-5.0) |
-posterize levels | Image#posterize(levels=4,
dither=false ) |
-preview type | Image#preview(type) |
No equivalent | |
-process command | No equivalent |
-profile filename +profile name |
Image#add_profile(filename) Image#delete_profile(name) |
-quality value | Image::Info#quality=value |
-quantize colorspace | Image#quantize(number_colors=256,
colorspace=RGBColorspace,
dither=true , tree_depth=0,
measure_error=false )ImageList#quantize(number_colors=256, colorspace=RGBColorspace, dither= true , tree_depth=0,
measure_error=false ) |
-quiet | No equivalent |
-radial-blur angle | Image#radial_blur(angle) |
-raise widthxheight +raise widthxheight |
Image#raise(width,
height, true )Image#raise(width, height, false ) |
-random-threshold lowxhigh | Image#random_threshold_channel(" lowxhigh" [, channel...]) |
-recolor matrix | Image#recolor(matrix) |
-red-primary x,y | Image#chromaticity= chromaticity |
-regard-warnings | No equivalent |
-region widthxheight+x+y | No equivalent |
-remote | No equivalent |
-render | No equivalent |
-repage geometry +repage |
Image#page=geometry This option corresponds to adding true as the
last argument to Image#crop. |
-resample horizontalxvertical | Image#resample(horizontal, vertical) |
-resize widthxheight | Image#resize(width, height) |
-roll +x+y | Image#roll(x, y) |
-rotate degrees | Image#rotate(degrees [, qualifier]) |
-sample widthxheight | Image#sample(width, height) |
-sampling-factor horizontal-factorxvertical-factor | Image::Info#sampling_factor=horizontal-factorx vertical-factor |
-scale widthxheight | Image#scale(width, height) |
-scene value | ImageList#scene=value |
-scenes value-value | No equivalent |
-screen | No equivalent |
-segment cluster-thresholdxsmoothing-threshold | Image#segment(colorspace=
RGBColorspace , cluster_threshold=1.0,
smoothing_threshold=1.5,
verbose=false) |
-separate | Image#channel(type) |
-sepia-tone threshold | Image#sepiatone(threshold=MaxRGB) |
-set attribute value | Image#['attribute'] = value |
-shade azimuthxelevation | Image#shade(shading=false ,
azimuth=30, elevation=30) |
-shadow opacityxsigma+x+y | Image#shadow(x=4, y=4, sigma=4.0, opacity=4.0) |
-shared-memory | No equivalent |
-sharpen radiusxsigma | Image#sharpen(radius=0.0, sigma=1.0) |
-shave widthxheight | Image#shave(width, height) |
-shear x-degreesxy-degrees | Image#shear(x_degrees, y_degrees) |
-sigmoidal-contrast contrastxmid-point | Image#sigmoidal_contrast_channel(
contrast=3.0, mid_point=50.0,
sharpen=false [, channel...]) |
-silent | No equivalent |
-size widthxheight+offset | Image::Info#size="widthxheight+ offset" |
-sketch radiusxsigma+angle | Image#sketch(radius=0.0, sigma=1.0, angle=0.0) |
-solarize threshold | Image#solarize(threshold=50) |
-splice widthxheight+x+y | Image#splice(x, y, width, height [, color]) |
-spread amount | Image#spread(amount=3) |
-stegano offset | Image#stegano(watermark, offset) |
-stereo | Image#stereo(offset_image) |
-stretch type | Draw#font_stretch(type) (for
drawing) Draw#font_stretch=type (for annotation) |
-storage-type type | This option corresponds to the type argument to Image#import_pixels and Image#export_pixels_to_str |
-strip | Image#strip! |
-stroke color | Draw#stroke(color) (for
drawing) Draw#stroke=color (for annotation) |
-strokewidth value | Draw#stroke_width(value)
(for drawing) Draw#stroke_width=value (for annotation) |
-support factor | This option corresponds to the support argument to Image#resize. |
-swap index,index | ImageList#[]= |
-swirl degrees | Image#swirl(degrees) |
-text-font | No equivalent |
-texture filename | Image::Info#texture=image |
-threshold value | Image#bilevel_channel(value [, channel...]) |
-thumbnail widthxheight | Image#thumbnail(width, height) |
-tile filename | Draw#tile(image) |
-tint | No equivalent |
-title | No equivalent |
-transform | Image#affine_transform( matrix) |
-transparent color | Image#transparent(color, opacity=TransparentOpacity) |
-transparent-color color | Image#transparent_color= color |
-transpose | Image#transpose |
-transverse | Image#transverse |
-treedepth value | This option corresponds to the tree_depth argument to Image#quantize and ImageList#quantize. |
-trim | Image#trim |
-type type | Image#type=type |
-undercolor color | Draw#text_undercolor(color) Draw#undercolor=color |
-unique-colors | Image#unique_colors |
-units type | Image#units=type |
-unsharp radiusxsigma+amount+threshold | Image#unsharp_mask(radius=0.0, sigma=1.0, amount=1.0, threshold=0.05) |
-verbose | No equivalent |
-version | Magick::Long_version |
-view string | Image::Info#view=string |
-vignette radiusxsigma+amount+threshold | Image#vignette(x, y, radius=0.0, sigma=10.0) |
-virtual-pixel method | Image#virtual_pixel_method= method |
-visual type | No equivalent |
-watermark brightness | See watermark, below |
-wave amplitudexwavelength | Image#wave(amplitude=25.0, wavelength=150.0) |
-weight type | Draw#font_weight(type) (for drawing) Draw#font_weight=type |
-white-point x.y | Image#chromaticity= chromaticity |
-white-threshold threshold | Image#white_threshold(red_channel [, green_channel[, blue_channel[, opacity_channel]]]) |
-window id | No equivalent |
-window-group | No equivalent |
-write filename | Image#write(filename) ImageList#write(filename) |
Magick Option | RMagick Method |
---|---|
-blend src-percentxdst-percent | Image#blend(overlay, src_percent, dst_percent, x_offset=0, y_offset=0) |
-displace x-amplitudexy-amplitude | Image#displace(displacement_map, x_amplitude, y_amplitude, x_offset=0, y_offset=0) |
-dissolve src_percentxdst_percent | Image#dissolve(overlay, src_percent, dst_percent, x_offset=0, y_offset=0) |
-watermark lightness | Image#watermark(mark, lightness=1.0, saturation=1.0, x_offset=0, y_offset=0) |
The RMagick methods that correspond to
montage
's options are in the
Magick::ImageList::Montage
class.
Magick Option | RMagick Method |
---|---|
-backgroundcolor color | Montage#background_color=color |
-bordercolor color | Montage#border_color=color |
-borderwidth value | Montage#border_width=value |
-clone | No equivalent |
-compose operator | Montage#compose=operator |
-fill color | Montage#fill=color |
-frame geometry | Montage#frame="geometry" |
-geometry geometry | Montage#geometry="geometry" |
-gravity type | Montage#gravity=type |
-mattecolor color | Montage#matte_color=color |
-mode type | No equivalent |
-pointsize value | Montage#pointsize=value |
-shadow | Montage#shadow=true |
-stroke color | Montage#stroke=color |
-texture filename | Montage#texture=image |
-tile geometry | Montage#tile=geometry |
-title string | Montage#title=string |